How to Fix Recliner Pull Handle?

Recliners are excellent for relaxing in front of the TV with a pet on your lap, such as the Lane Home Furnishings recliner. But, when something goes wrong, how to fix the recliner pull handle on your own?

One of the most annoying things in the world is when you sit in your recliner, you are ready to watch a movie, and then you pull the handle, and nothing happens. It can ruin an entire evening and also be an extra expense in your house.

Luckily, fixing a recliner is not a big deal at all and doesn’t even take that much time to complete. It only takes a few minutes to fix either broken or missing recliners. As soon as you finish this step, you can go back to relaxing in your favorite chair and enjoy the movie without ruining your night.

In general, there are two ways to fix a broken recliner pull handle.

First Fixing Method

Before you decide to call a repairman to do the work for you, try to do the following few steps on your own, and you will see how easy it is.

Here are the steps that you need to follow:

1.   Gather your tools

Bring together all of the tools that you will need to make the replacement. You will likely need a screwdriver and a pair of pliers to help you remove the old mechanism. By having everything ready and in front of you, the whole process will be quicker.

2.   Remove the screws

Start by removing the screws that are currently keeping the handle together. You will notice that there are two screws in place at the moment. Use your screwdriver to remove them gently. Take care not to twist the screws out of place because you will need to put new screws in the same place.

3.   Expand the chair for easier access

If you are having trouble locating or accessing the screws, expand the chair as much as possible, and it will be a lot easier to see them. This also means that it will be easier for you to unscrew the screws quickly.

4.   Remove the cable

The next step is to remove the sable that controls the handle. You will see the cable as soon as you remove the screws and open the mechanism. Squeeze the base of the cable. When you feel that it has become loose, remove the entire cable and the base mechanism.

5.   Insert the new cable

The new cable mechanism will go in the same way as the old cable. Make sure that you put it correctly in place and that you tighten everything. Before putting the lid back on, you can already check if the recliner is reacting correctly to the new mechanism.

6.   Return the screws in place

Finally, return the new screws in place. Make sure that you tighten them properly with a screwdriver. Then, return the recliner into place, sit on it and check if it works.

Second Fixing Method

The second method is similar to the first one and is just as easy to do.

1.   Prepare the new replacement kit

Make sure that you have the replacement kit near you, such as the one for the Homall Recliner Chair.

2.   Prepare the recliner

In this case, you have to make sure that the recliner is in the correct position. Close the footrest and flip the recliner so that it is facing the floor. This will give you access to the bottom of the chair.

3.   Remove the handle

Look for the handle of your recliner and prepare to remove it. In some cases, there will again be screws holding it together. This means that you have to use a screwdriver to remove it. In other cases, you can simply twist the handle, and it will come off.

4.   Remove the handle

Pull out the handle and remove the cover below it. This will give you access to the mechanism, and you will be able to replace it quickly.

5.   Insert the new mechanism

Insert the new mechanism in the same position as the old one. Be careful to put it correctly in place and tighten it. Again, you can check if the recliner is working properly before closing everything.

6.   Return the screws and the cover

Not it’s time to put everything back into place. If your recliner has screws, screw them back in. if it was just a cover below the handle, put the cover back into place.

How to Maintain a Pull Handle

In order to make sure that you will be able to enjoy your recliner for as long as possible, you need to take proper care of it.

This means that you should clean your recliner on a regular basis and occasionally oil the mechanism.

Never use the recliner in a way that the manufacturer did not intend. When you use the handle, do so gently. Don’t add too much weight to the chair because you could break it. Don’t allow children and pets to play with it in a way that may damage the recliner.

Always clean the pull handle from any dirt or dust. If these things pile up, they could jam the mechanism and stop it from working correctly.

Also, it can be a great idea to purchase a new recliner if your one is too old. For instance, check Simmons recliners to achieve ultimate comfort. You might be interested in getting a club chair as well. Our list offers the best options for your home and office!

Final Thoughts

There are many things that you are able to do on your own if you just spend a little time on them. This is why it is always a good idea to have a small set of tools in your home. You can use them to fix minor problems such as this one, without spending more money from your budget on extra help.

Now you know how to fix a recliner pull handle. It is much easier than it may seem, and you don’t need to hire a professional right away to do it for you. A recliner will last for a long time as long as you treat it with care and maintain it properly. This magnificent chair is a great way to enjoy your free time and even take a nap. There are many different styles of recliners on offer, so you are sure to find one that suits your lifestyle best.

facebook

twitter

linkedin

reddit

pinterest